You are here

Need an Item That’s Not Listed?  Place Buying Request

Search results for Gamesa Oil & Grease

Specific oil, grease and coating concentrates developed for the wind turbine industry. 

    • Order online
      OIL RED (50L DRUM)
      Wind turbine parts
      Oil & Grease
      Aceites sintéticos (PAG) de larga duración y elevadas prestaciones. Excelentes propiedades antidesgaste, gran estabilidad a la oxidación, bajo punto de congelación, inertes frente a materiales metálicos, incluso con aleaciones de aluminio y cobre. Muy resistente al cizallamiento mecánico. Presentan muy buen comportamiento viscosidad-temperatura. Temperaturas operativas a + 200ºC. Muy estables al envejecimiento (muy larga vida útil). Muy bajos coeficientes de fricción, incluso con contaminaciones de agua hasta un 1%, adecuado para reductores y otros mecanismos expuestos a entornos con un alto nivel de humedad. Aplicaciones: Poliglicoles para lubricación de por vida de cajas de engranajes, sinfin y corona y en reductores a muy altas o bajas temperaturas. Engranajes, sinfines, sistemas de circulación, rodamientos, cojinetes lisos y cadenas. OIL RED (50L DRUM) Total units available:  500 Measurement unit:  l Expected lead time:  3d Product group:  Oil & Grease Wind turbine brand:  Various Price:  5.49 Condition:  New Warranty:  No Exchange components:  No
      €5.49
      Brand: 
      Various
      Country: 
      Spain
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • Order online
      Kluberplex AG-1 ultra
      Wind turbine parts
      Oil & Grease
      A01C02 Kluberplex AG-1 ultra Part manufacturer:  Klüber Lubrication Total units available:  4 Measurement unit:  pcs Expected lead time:  24h Product group:  Oil & Grease Wind turbine brand:  All Price:  65.00 Condition:  New Warranty:  No Exchange components:  No
      €65.00
      Brand: 
      All
      Country: 
      United Kingdom
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • Order online
      Optimol Optipit yaw bearing grease 20x400g
      Wind turbine parts
      Oil & Grease
      1201511561 Optimol Optipit yaw bearing grease 20x400g Part manufacturer:  CASTROL Quantity:  2 Measurement unit:  box Lead time:  24h Product group:  Oil & Grease Wind turbine brand:  All Price:  166.00 Condition:  New Warranty:  No Exchange components:  No
      €166.00
      Brand: 
      All
      Country: 
      United Kingdom
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • Order online
      SKF bearing grease Lgwm1 12x400g
      Wind turbine parts
      Oil & Grease
      1201511560 SKF bearing grease Lgwm1 12x400g Part manufacturer:  SKF Quantity:  14 Measurement unit:  box Lead time:  24h Product group:  Oil & Grease Wind turbine brand:  All Price:  121.00 Condition:  New Warranty:  No Exchange components:  No
      €121.00
      Brand: 
      All
      Country: 
      United Kingdom
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • Order online
      Shell Rhodina BBZ box of 12x400g
      Wind turbine parts
      Oil & Grease
      1306402153 Shell Rhodina BBZ box of 12x400g Part manufacturer:  SHELL Quantity:  4 Measurement unit:  box Lead time:  24h Product group:  Oil & Grease Wind turbine brand:  All Price:  121.00 Condition:  New Warranty:  No Exchange components:  No
      €121.00
      Brand: 
      All
      Country: 
      United Kingdom
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • Order online
      GREASE(BOTE 240ML)
      Wind turbine parts
      Oil & Grease
      GP019439
      GREASE(BOTE 240ML) Part number manufacturer:  GP019439 Part manufacturer:  GAMESA EÓLICA, S.L. Total units available:  30 Part number turbine manufacturer:  Measurement unit:  pcs Expected lead time:  3d Product group:  Oil & Grease Wind turbine brand:  Gamesa Price:  59.81 Condition:  New Warranty:  No Exchange components:  No
      €59.81
      Brand: 
      Gamesa
      Country: 
      Spain
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • Order online
      GREASE SPRAY TEFF LIQUID
      Wind turbine parts
      Oil & Grease
      22109
      GREASE SPRAY TEFF LIQUID Part number manufacturer:  22109 Part manufacturer:  FERRETERÍA IRIGARAY, S.L. Total units available:  1500 Part number turbine manufacturer:  Measurement unit:  pcs Expected lead time:  3d Product group:  Oil & Grease Wind turbine brand:  Various Price:  22.36 Condition:  New Warranty:  No Exchange components:  No
      €22.36
      Brand: 
      Various
      Country: 
      Spain
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • Order online
      GREASE (1KG CAN)
      Wind turbine parts
      Oil & Grease
      149162
      GE's part number: T85220100000, Acciona: 1005891 GREASE (1KG CAN) Part number manufacturer:  149162 Part manufacturer:  GAMESA EÓLICA, S.L. Total units available:  542 Part number turbine manufacturer:  1005891, T85220100000 Measurement unit:  kg Expected lead time:  3d Product group:  Oil & Grease Wind turbine brand:  Various Price:  6.47 Condition:  New Warranty:  No Exchange components:  No
      €6.47
      Brand: 
      Various
      Country: 
      Spain
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • Order online
      Kluberbemi 41-132
      Wind turbine parts
      Oil & Grease
      B01A04 Kluberbemi 41-132 Part manufacturer:  Klüber Lubrication Quantity:  11 Measurement unit:  pcs Lead time:  24h Product group:  Oil & Grease Wind turbine brand:  All Price:  20.00 Condition:  New Warranty:  No Exchange components:  No
      €20.00
      Brand: 
      All
      Country: 
      United Kingdom
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • Order online
      KLUBERPLEX GREASE AG 11-462 1 kg
      Wind turbine parts
      Oil & Grease
      GP009909
      1 kg KLUBERPLEX GREASE AG 11-462 1 kg Part number manufacturer:  GP009909 Total units available:  1 Measurement unit:  pcs Expected lead time:  2w Product group:  Oil & Grease Wind turbine brand:  Gamesa Condition:  New Warranty:  Yes Exchange components:  No
      Brand: 
      Gamesa
      Country: 
      Netherlands
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • ADDINOL Eco Gear 150 W, drum (205l)
      Wind turbine parts
      Oil & Grease
      ADDINOL ECO GEAR 150W was especially designed for the lubrication and protection of gearboxes in wind turbines. • Highly recommended for highest specific loads of friction partners, dynamically changing loads and critical thermal conditions in bearings and gears. • Suitable for use in enclosed industrial gear units of different types. • Ideally suited for lubrication of circulation systems, if lubricants of base oil group I through IV are not sufficient. • Working temperature:-35 °C (ISO VG 460 from-30 °C) to +120 °C, for short time up to +150 °C. The performance of ADDINOL Eco Gear W includes maximum oxidation stability, effective protection against wear and ageing, extended oil change intervals while reducing friction between friction partners. Thus, an improvement of the transmission efficiency across virtually all operating conditions in the drive train of the slow running up to the maximum speed is achieved. • Maximum shear stability • Lower power loss • Ensures pumpability even at extreme minus temperatures • Increases efficiency, lowers temperatures • Extended service life, prevents rust • Neutral behavior towards all types of plastics • High-performance for future challenges! Meets and exceeds the requirements of specifications: • DIN 51517-3 • ISO 12925-1 • AGMA 9005-E02 NOTE Viscosity to be used depends largely on the use cases, the operating conditions, as well as the manufacturer's instructions in the respective application. TERMS OF DELIVERY Deliveries outside Germany are performed by ADDINOL dealers, consequently, the delivery time may vary depending on the delivery location. Please enquire the respective delivery conditions of the respective country of destination in advance. ADDINOL Eco Gear 150 W, drum (205l) Part manufacturer:  Addinol Total units available:  5 Measurement unit:  pcs Expected lead time:  2w Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • ADDINOL Eco Gear 220 S, 20L
      Wind turbine parts
      Oil & Grease
      ADDINOL Eco Gear 220 S is a silicon free high performance gear oil based on synthetic components (PAO) and especially developed additives (Surftec®-Technology) Perfectly suitable for the usage in wind turbines and for the lubrication in areas of boundary and mixed friction. Also suitable for lubrication of closed industrial areas of different types. Applicable to the lubrication of slide and rolling bearings. Preferred application with high and specific loads of the friction partners, with dynamically changing loads and thermic critical conditions in a broad temperature range. Applicable to the lubrication of gear couplings, conducts, joints and circular lubrication of all types and operating conditions. temperature range from-30°C to +120°C, short time up to 150°C- reliable prevention of micro pitting, pitting and equalization of damages on the surface- high scuffing load capacity even with low peripheral speeds and mixed friction- significant extension of the service life of machine elements and industrial plants- lower thermic stress of all gearbox components- larger intervals of oil changes due to less stress- significant increase of service life of the lubricants, especially with high operational temperatures- no limitation when used with roller or slide bearings, filters and centrifuges Meets and exceeds requirements of specifications:- DIN 51527-3- ISO 12925-1 Approval:- FLENDER- further approvals Information: The viscosity to be utilized depends on the individual application, the operating conditions and the manufacturing specifications. Delivery conditions: Delivery outside of Germany is organized by ADDINOL distributors; the time of delivery can therefore depend on the location. Please ask about the conditions of delivery for you country of destination beforehand. ADDINOL Eco Gear 220 S, 20L Part manufacturer:  Addinol Total units available:  15 Measurement unit:  pcs Expected lead time:  2w Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • ADDINOL Eco Gear 460 S, 20L
      Wind turbine parts
      Oil & Grease
      ADDINOL Eco Gear 460 S is a silicon free high performance gear oil based on synthetic components (PAO) and especially developed additives (Surftec®-Technology) Perfectly suitable for the usage in wind turbines and for the lubrication in areas of boundary and mixed friction. Also suitable for lubrication of closed industrial areas of different types. Applicable to the lubrication of slide and rolling bearings. Preferred application with high and specific loads of the friction partners, with dynamically changing loads and thermic critical conditions in a broad temperature range. Applicable to the lubrication of gear couplings, conducts, joints and circular lubrication of all types and operating conditions. temperature range from-30°C to +120°C, short time up to 150°C- reliable prevention of micro pitting, pitting and equalization of damages on the surface- high scuffing load capacity even with low peripheral speeds and mixed friction- significant extension of the service life of machine elements and industrial plants- lower thermic stress of all gearbox components- larger intervals of oil changes due to less stress- significant increase of service life of the lubricants, especially with high operational temperatures- no limitation when used with roller or slide bearings, filters and centrifuges Meets and exceeds requirements of specifications:- DIN 51527-3- ISO 12925-1 Approval:- FLENDER- further approvals Information: The viscosity to be utilized depends on the individual application, the operating conditions and the manufacturing specifications. Delivery conditions: Delivery outside of Germany is organized by ADDINOL distributors; the time of delivery can therefore depend on the location. Please ask about the conditions of delivery for you country of destination beforehand. ADDINOL Eco Gear 460 S, 20L Part manufacturer:  Addinol Total units available:  15 Measurement unit:  pcs Expected lead time:  2w Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • ADDINOL Hightemp EK2, 400g cartridge
      Wind turbine parts
      Oil & Grease
      ADDINOL Hightemp EK 2 is a lithium-calcium-soap grease based on mineral oils with EP-additives range of operating temperature:-30°C to + 150°C, short time up to +200°C • perfectly suitable for lubrication of highly pressurized roller and plain bearings in industrial and automotive applications • perfectly applicable for wheel bearing lubrication of commercial vehicles • applicable for rapidly running wheel bearings • Guarantee of structural stability • excellent aging stability • direct influence of water possible • long life time of machine parts • applicable up to +150°C • lubrication of highly pressurized bearings Meets the requirements of: • MAN 284 Li-H 2 • Volve STD 1277,18 and 1277,2 • MB 265.1 Designation according to DIN 51502: • KP2P-30 Designation according to ISO 6743: • ISO-L-X CDHB2 Corresponds to NLGI-class 2. NOTE Viscosity to be used depends largely on the use cases, the operating conditions, as well as the manufacturer's instructions in the respective application. TERMS OF DELIVERY Deliveries outside Germany are performed by ADDINOL dealers, consequently, the delivery time may vary depending on the delivery location. Please enquire the respective delivery conditions of the respective country of destination in advance. ADDINOL Hightemp EK2, 400g cartridge Total units available:  20 Measurement unit:  pcs Expected lead time:  2w Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • ADDINOL Hightemp EK 2, 1kg
      Wind turbine parts
      Oil & Grease
      ADDINOL Hightemp EK 2 is a lithium-calcium-soap grease based on mineral oils with EP-additives range of operating temperature:-30°C to + 150°C, short time up to +200°C • perfectly suitable for lubrication of highly pressurized roller and plain bearings in industrial and automotive applications • perfectly applicable for wheel bearing lubrication of commercial vehicles • applicable for rapidly running wheel bearings • Guarantee of structural stability • excellent aging stability • direct influence of water possible • long life time of machine parts • applicable up to +150°C • lubrication of highly pressurized bearings Meets the requirements of: • MAN 284 Li-H 2 • Volve STD 1277,18 and 1277,2 • MB 265.1 Designation according to DIN 51502: • KP2P-30 Designation according to ISO 6743: • ISO-L-X CDHB2 Corresponds to NLGI-class 2. NOTE Viscosity to be used depends largely on the use cases, the operating conditions, as well as the manufacturer's instructions in the respective application. TERMS OF DELIVERY Deliveries outside Germany are performed by ADDINOL dealers, consequently, the delivery time may vary depending on the delivery location. Please enquire the respective delivery conditions of the respective country of destination in advance. ADDINOL Hightemp EK 2, 1kg Part manufacturer:  Addinol Total units available:  5 Measurement unit:  pcs Expected lead time:  2w Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • ADDINOL COMBIPLEX OG 05, 18kg
      Wind turbine parts
      Oil & Grease
      ADDINOL Combiplex OG 05 is an especially developed lithium-calcium-complex-fat based on mineral oils. range of operating temperature:-30°C to + 140°C, short time up to +180°C ADDINOL Combiplex OG 05 contains no conventional EP- and AW-additives. Because of its highly developed La-Ca thickener it achieves much better results regarding wear protection and load carrying capacity than lubrication fat added with typical EP-AW additives. • perfectly suitable for lubrication of highly pressurized roller and plain bearings in increased bearing temperatures • good usage with immersion or circulation lubrication as well as with spray lubrication of large gear rim drives (rotary furnace, tube mill, drums and similar machines in cement, lime, cast, mine and chemistry industry as well as power plants) • excellent usage in middle and large drives in sugar and paper factories, in marine and offshore techniques • usable under difficult service conditions and extremely high loads • long life time of machine parts • direkt contact to water is possible NOTE Viscosity to be used depends largely on the use cases, the operating conditions, as well as the manufacturer's instructions in the respective application. TERMS OF DELIVERY Deliveries outside Germany are performed by ADDINOL dealers, consequently, the delivery time may vary depending on the delivery location. Please enquire the respective delivery conditions of the respective country of destination in advance. ADDINOL COMBIPLEX OG 05, 18kg Part manufacturer:  Addinol Total units available:  5 Measurement unit:  pcs Expected lead time:  2w Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • ADDINOL HV ECO FLUID 46, FASS (205L)
      Wind turbine parts
      Oil & Grease
      ADDINOL ECO FLUID 46 is a pressure fluid based on mineral oils. In contrast to conventional hydraulic oils, this pressure medium reaches an extremely good friction behavior due to its newly developed additive technology. That's how this product series offers great potential for energy savings, which has already been documented in practice in fleet tests. It is especially suitable for the use in modern hydraulic plants, especially those situated in the outside working all year round. These plants (e.g. hydrostatic circuits in construction machines, forklifts, container and communal vehicles) are exposed to major temperature fluctuation. • energy saving, low service costs • well-functioning in low temperatures and excellent high temperature viscosity performance • faster flow speed in temperature peaks • higher hydraulic power under full load • shorter reaction time of the hydraulic system • increased protection over leakage • trouble-free service even when used with different metals • long oil life time • year-round use • reduced range of products, simpler logistics Meets and exceeds the requirements of specifications: • DIN 51524-3 • ISO 11158 (HV) • AFNOR NFE 48603 (HV) • CETOP RP 91 H (HV) • DIN EN ISO 6743-4 (HV) Addinol HV Eco Fluid 46 is authorized by • Arburg GmbH & Co. KG NOTE Viscosity to be used depends largely on the use cases, the operating conditions, as well as the manufacturer's instructions in the respective application. TERMS OF DELIVERY Deliveries outside Germany are performed by ADDINOL dealers, consequently, the delivery time may vary depending on the delivery location. Please enquire the respective delivery conditions of the respective country of destination in advance. ADDINOL HV ECO FLUID 46, FASS (205L) Part manufacturer:  Addinol Total units available:  5 Measurement unit:  pcs Expected lead time:  2w Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • ADDINOL HV ECO FLUID 46, 20L
      Wind turbine parts
      Oil & Grease
      ADDINOL ECO FLUID 46 is a pressure fluid based on mineral oils. In contrast to conventional hydraulic oils, this pressure medium reaches an extremely good friction behavior due to its newly developed additive technology. That's how this product series offers great potential for energy savings, which has already been documented in practice in fleet tests. It is especially suitable for the use in modern hydraulic plants, especially those situated in the outside working all year round. These plants (e.g. hydrostatic circuits in construction machines, forklifts, container and communal vehicles) are exposed to major temperature fluctuation. • energy saving, low service costs • well-functioning in low temperatures and excellent high temperature viscosity performance • faster flow speed in temperature peaks • higher hydraulic power under full load • shorter reaction time of the hydraulic system • increased protection over leakage • trouble-free service even when used with different metals • long oil life time • year-round use • reduced range of products, simpler logistics Meets and exceeds the requirements of specifications: • DIN 51524-3 • ISO 11158 (HV) • AFNOR NFE 48603 (HV) • CETOP RP 91 H (HV) • DIN EN ISO 6743-4 (HV) Addinol HV Eco Fluid 46 is authorized by • Arburg GmbH & Co. KG NOTE Viscosity to be used depends largely on the use cases, the operating conditions, as well as the manufacturer's instructions in the respective application. TERMS OF DELIVERY Deliveries outside Germany are performed by ADDINOL dealers, consequently, the delivery time may vary depending on the delivery location. Please enquire the respective delivery conditions of the respective country of destination in advance. ADDINOL HV ECO FLUID 46, 20L Part manufacturer:  Addinol Total units available:  15 Measurement unit:  pcs Expected lead time:  2w Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • ADDINOL ECO GREASE PD 2-120, 400g cartridge
      Wind turbine parts
      Oil & Grease
      ADDINOL Eco Grease PD 2-120 is a high performance grease based on mineral-oils, especially developed additives (Surftec®-Technology) and lithium soaps as a thickener. It is exploitable in central lubrication systems and it is resistant to cold and heat. Operating temperature:-35°C to +140°C Perfectly suitable for long- or life-time lubrication of rolling bearings, highly burdened gearboxes and all bearings vulnerable to wear under extreme conditions. Especially suitable in places where extreme pressure is put on the bearing and where vibration and temperature changes or other loads appear. Perfectly suitable for usage in main and generator bearings in the wind industry, gearbox motors, for bearings in feed rolls, contact areas of pressure plates (machines for newspaper print), wood router, robots etc. reliable prevention of micro pitting, pitting and re-flattening of damages on the surface high scuffing load capacity even with low peripheral speeds and mixed friction considerable extension of service lives of machine elements and industrial plants, prevents fretting corrosion lower thermic stress to all bearing components no restriction in the usage of roller or slide bearings Indication in accordance with DIN 51502: KP2N-35 (Eco Grease PD 2-120) Indication in accordance with ISO 6743: ISO-L-X CDHB2 (Eco Grease PD 2-120) Corresponds to NLGI-class 2. Tested and suitable in central lubrication systems of: SKF (Lincoln, Willy Vogel) Bijur Delimon REFERENCE The necessary viscosity depends on the areas of application, the operational conditions and the manufacturer's instructions in the respective area of application. CONDITIONS OF DELIVERY Deliveries outside Germany are performed via ADDINOL manufacturers. That's why the time of delivery can vary depending on the place of delivery. Please ask about the conditions of delivery of each country beforehand. ADDINOL ECO GREASE PD 2-120, 400g cartridge Part manufacturer:  Addinol Total units available:  20 Measurement unit:  pcs Expected lead time:  24h Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)
    • ADDINOL ECO GREASE PD 2-400, 5kg
      Wind turbine parts
      Oil & Grease
      ADDINOL Eco Grease PD 2-400 is a high performance grease based on mineral-oils, especially developed additives (Surftec®-Technology) and lithium soaps as a thickener. It is exploitable in central lubrication systems and it is resistant to cold and heat. Operating temperature:-38°C to +180°C Perfectly suitable for long- or life-time lubrication of rolling bearings, highly burdened gearboxes and all bearings vulnerable to wear under extreme conditions. Especially suitable in places where extreme pressure is put on the bearing and where vibration and temperature changes or other loads appear. Perfectly suitable for usage in main and generator bearings in the wind industry, gearbox motors, for bearings in feed rolls, contact areas of pressure plates (machines for newspaper print), wood router, robots etc. reliable prevention of micro pitting, pitting and re-flattening of damages on the surface high scuffing load capacity even with low peripheral speeds and mixed friction considerable extension of service lives of machine elements and industrial plants, prevents fretting corrosion lower thermic stress to all bearing components no restriction in the usage of roller or slide bearings Indication in accordance with DIN 51502: KPHC2R-35 (Eco Grease PD 2-400) Indication in accordance with ISO 6743: ISO-L-X CFHB2 (Eco Grease PD 2-400)  Corresponds to NLGI-class 2. Tested and suitable in central lubrication systems of: SKF (Lincoln, Willy Vogel) Bijur Delimon REFERENCE The necessary viscosity depends on the areas of application, the operational conditions and the manufacturer's instructions in the respective area of application. CONDITIONS OF DELIVERY Deliveries outside Germany are performed via ADDINOL manufacturers. That's why the time of delivery can vary depending on the place of delivery. Please ask about the conditions of delivery of each country beforehand. ADDINOL ECO GREASE PD 2-400, 5kg Part manufacturer:  Addinol Total units available:  5 Measurement unit:  pcs Expected lead time:  2w Product group:  Oil & Grease Wind turbine brand:  All Condition:  New
      Brand: 
      All
      Country: 
      Germany
      Supplier: 
      View supplier
       
      Save for later and be able to easily send multiple requests (you need a free account for this option)

Pages