Need an Item That’s Not Listed? Place Buying Request
Search results for Various Oil & Grease
Specific oil, grease and coating concentrates developed for the wind turbine industry.
Active filters
Search found 133 items
- Remove Various filter Various
- Remove Oil & Grease filter Oil & Grease
- Remove Part filter Part
- Order online
Wind turbine partsA01C02 Kluberplex AG-1 ultra Part manufacturer: Klüber Lubrication Total units available: 4 Measurement unit: pcs Expected lead time: 24h Product group: Oil & Grease Wind turbine brand: All Price: 65.00 Condition: New Warranty: No Exchange components: No€65.00Brand:Country:United Kingdom - Order online
Wind turbine partsAceites sintéticos (PAG) de larga duración y elevadas prestaciones. Excelentes propiedades antidesgaste, gran estabilidad a la oxidación, bajo punto de congelación, inertes frente a materiales metálicos, incluso con aleaciones de aluminio y cobre. Muy resistente al cizallamiento mecánico. Presentan muy buen comportamiento viscosidad-temperatura. Temperaturas operativas a + 200ºC. Muy estables al envejecimiento (muy larga vida útil). Muy bajos coeficientes de fricción, incluso con contaminaciones de agua hasta un 1%, adecuado para reductores y otros mecanismos expuestos a entornos con un alto nivel de humedad. Aplicaciones: Poliglicoles para lubricación de por vida de cajas de engranajes, sinfin y corona y en reductores a muy altas o bajas temperaturas. Engranajes, sinfines, sistemas de circulación, rodamientos, cojinetes lisos y cadenas. OIL RED (50L DRUM) Total units available: 500 Measurement unit: l Expected lead time: 3d Product group: Oil & Grease Wind turbine brand: Various Price: 5.49 Condition: New Warranty: No Exchange components: No€5.49Brand:Country:Spain - Order online
Wind turbine parts1201511561 Optimol Optipit yaw bearing grease 20x400g Part manufacturer: CASTROL Quantity: 2 Measurement unit: box Lead time: 24h Product group: Oil & Grease Wind turbine brand: All Price: 166.00 Condition: New Warranty: No Exchange components: No€166.00Brand:Country:United Kingdom - Order online
Wind turbine parts1201511560 SKF bearing grease Lgwm1 12x400g Part manufacturer: SKF Quantity: 14 Measurement unit: box Lead time: 24h Product group: Oil & Grease Wind turbine brand: All Price: 121.00 Condition: New Warranty: No Exchange components: No€121.00Brand:Country:United Kingdom - Order online
Wind turbine parts1306402153 Shell Rhodina BBZ box of 12x400g Part manufacturer: SHELL Quantity: 4 Measurement unit: box Lead time: 24h Product group: Oil & Grease Wind turbine brand: All Price: 121.00 Condition: New Warranty: No Exchange components: No€121.00Brand:Country:United Kingdom - Order online
Wind turbine parts22109GREASE SPRAY TEFF LIQUID Part number manufacturer: 22109 Part manufacturer: FERRETERÍA IRIGARAY, S.L. Total units available: 1500 Part number turbine manufacturer: Measurement unit: pcs Expected lead time: 3d Product group: Oil & Grease Wind turbine brand: Various Price: 22.36 Condition: New Warranty: No Exchange components: No€22.36Brand:Country:Spain - Order online
Wind turbine parts149162GE's part number: T85220100000, Acciona: 1005891 GREASE (1KG CAN) Part number manufacturer: 149162 Part manufacturer: GAMESA EÓLICA, S.L. Total units available: 542 Part number turbine manufacturer: 1005891, T85220100000 Measurement unit: kg Expected lead time: 3d Product group: Oil & Grease Wind turbine brand: Various Price: 6.47 Condition: New Warranty: No Exchange components: No€6.47Brand:Country:Spain
- Order online
Wind turbine partsB01A04 Kluberbemi 41-132 Part manufacturer: Klüber Lubrication Quantity: 11 Measurement unit: pcs Lead time: 24h Product group: Oil & Grease Wind turbine brand: All Price: 20.00 Condition: New Warranty: No Exchange components: No€20.00Brand:Country:United Kingdom
Wind turbine partsADDINOL ECO GEAR 460 W was specifically designed for the lubrication and protection of gearboxes in wind turbines.- preferred application with high and specific loads of the friction partners, with dynamically changing loads and thermic critical conditions in a broad temperature range.- suitable for lubrication of closed industrial areas of different types- perfectly suitable for the lubrication in circulation systems- temperature range from-35°C (ISO VG 460 from-30°C on) to +120°C, short time up to +150°C The performance of ADDINOL Eco Gear W includes maximal oxidation stability, effective protection against wear and aging, extended intervals of oil changes with reduced friction between friction partners. This is how the efficiency of the gearboxes is increased, in almost all operational conditions in the drive, from low to maximum speeds.- maximum shear stability- lower power loss- ensures pumpability, even with extreme freezing-temperatures- increases the efficiency, decreases the temperatures- increased service life, prevents rust- neutral behavior towards all plastics- high performance for future challenges! Meets and exceeds requirements of specifications:- DIN 51527-3- ISO 12925-1- AGMA 9005-E02 Information: The viscosity to be utilized depends on the individual application, the operating conditions and the manufacturing specifications. Delivery conditions: Delivery outside of Germany is organized by ADDINOL distributors; the time of delivery can therefore depend on the location. Please ask about the conditions of delivery for you country of destination beforehand. ADDINOL Eco Gear 460 W, 20L Part manufacturer: Addinol Total units available: 15 Measurement unit: pcs Expected lead time: 2w Product group: Oil & Grease Wind turbine brand: All Condition: New
Wind turbine partsADDINOL ECO GEAR 460 W was specifically designed for the lubrication and protection of gearboxes in wind turbines.- preferred application with high and specific loads of the friction partners, with dynamically changing loads and thermic critical conditions in a broad temperature range.- suitable for lubrication of closed industrial areas of different types- perfectly suitable for the lubrication in circulation systems- temperature range from-35°C (ISO VG 460 from-30°C on) to +120°C, short time up to +150°C The performance of ADDINOL Eco Gear W includes maximal oxidation stability, effective protection against wear and aging, extended intervals of oil changes with reduced friction between friction partners. This is how the efficiency of the gearboxes is increased, in almost all operational conditions in the drive, from low to maximum speeds.- maximum shear stability- lower power loss- ensures pumpability, even with extreme freezing-temperatures- increases the efficiency, decreases the temperatures- increased service life, prevents rust- neutral behavior towards all plastics- high performance for future challenges! Meets and exceeds requirements of specifications:- DIN 51527-3- ISO 12925-1- AGMA 9005-E02 Information: The viscosity to be utilized depends on the individual application, the operating conditions and the manufacturing specifications. Delivery conditions: Delivery outside of Germany is organized by ADDINOL distributors; the time of delivery can therefore depend on the location. Please ask about the conditions of delivery for you country of destination beforehand. ADDINOL Eco Gear 460 W, drum (205L) Part manufacturer: Addinol Total units available: 5 Measurement unit: pcs Expected lead time: 24h Product group: Oil & Grease Wind turbine brand: All Condition: New
Wind turbine partsADDINOL ECO GEAR 320 W was specifically designed for the lubrication and protection of gearboxes in wind turbines.- preferred application with high and specific loads of the friction partners, with dynamically changing loads and thermic critical conditions in a broad temperature range.- suitable for lubrication of closed industrial areas of different types- perfectly suitable for the lubrication in circulation systems- temperature range from-35°C (ISO VG 460 from-30°C on) to +120°C, short time up to +150°C The performance of ADDINOL Eco Gear W includes maximal oxidation stability, effective protection against wear and aging, extended intervals of oil changes with reduced friction between friction partners. This is how the efficiency of the gearboxes is increased, in almost all operational conditions in the drive, from low to maximum speeds.- maximum shear stability- lower power loss- ensures pumpability, even with extreme freezing-temperatures- increases the efficiency, decreases the temperatures- increased service life, prevents rust- neutral behavior towards all plastics- high performance for future challenges! Meets and exceeds requirements of specifications:- DIN 51527-3- ISO 12925-1- AGMA 9005-E02 Information: The viscosity to be utilized depends on the individual application, the operating conditions and the manufacturing specifications. Delivery conditions: Delivery outside of Germany is organized by ADDINOL distributors; the time of delivery can therefore depend on the location. Please ask about the conditions of delivery for you country of destination beforehand. ADDINOL Eco Gear 320 W, drum (205L) Part manufacturer: Addinol Total units available: 5 Measurement unit: pcs Expected lead time: 24h Product group: Oil & Grease Wind turbine brand: All Condition: New
Wind turbine partsADDINOL ECO GEAR 220 W was specifically designed for the lubrication and protection of gearboxes in wind turbines. The performance of ADDINOL Eco Gear W includes maximal oxidation stability, effective protection against wear and aging, extended intervals of oil changes with reduced friction between friction partners. This is how the efficiency of the gearboxes is increased, in almost all operational conditions in the drive, from low to maximum speeds.- maximum shear stability- lower power loss- ensures pumpability, even with extreme freezing-temperatures- increases the efficiency, decreases the temperatures- increased service life, prevents rust- neutral behavior towards all plastics- high performance for future challenges! Meets and exceeds requirements of specifications:- DIN 51527-3- ISO 12925-1- AGMA 9005-E02 Information: The viscosity to be utilized depends on the individual application, the operating conditions and the manufacturing specifications. Delivery conditions: Delivery outside of Germany is organized by ADDINOL distributors; the time of delivery can therefore depend on the location. Please ask about the conditions of delivery for you country of destination beforehand. ADDINOL Eco Gear 220W, drum (205L) Part manufacturer: Addinol Total units available: 5 Measurement unit: pcs Expected lead time: 2w Product group: Oil & Grease Wind turbine brand: All Condition: New
Wind turbine partsADDINOL ECO GEAR 220 W was specifically designed for the lubrication and protection of gearboxes in wind turbines. The performance of ADDINOL Eco Gear W includes maximal oxidation stability, effective protection against wear and aging, extended intervals of oil changes with reduced friction between friction partners. This is how the efficiency of the gearboxes is increased, in almost all operational conditions in the drive, from low to maximum speeds.- maximum shear stability- lower power loss- ensures pumpability, even with extreme freezing-temperatures- increases the efficiency, decreases the temperatures- increased service life, prevents rust- neutral behavior towards all plastics- high performance for future challenges! Meets and exceeds requirements of specifications:- DIN 51527-3- ISO 12925-1- AGMA 9005-E02 Information: The viscosity to be utilized depends on the individual application, the operating conditions and the manufacturing specifications. Delivery conditions: Delivery outside of Germany is organized by ADDINOL distributors; the time of delivery can therefore depend on the location. Please ask about the conditions of delivery for you country of destination beforehand. ADDINOL Eco Gear 220W, 20L Part manufacturer: Addinol Total units available: 15 Measurement unit: pcs Expected lead time: 2w Product group: Oil & Grease Wind turbine brand: All Condition: New
Wind turbine partsADDINOL ECO GEAR 320 W was specifically designed for the lubrication and protection of gearboxes in wind turbines.- preferred application with high and specific loads of the friction partners, with dynamically changing loads and thermic critical conditions in a broad temperature range.- suitable for lubrication of closed industrial areas of different types- perfectly suitable for the lubrication in circulation systems- temperature range from-35°C (ISO VG 460 from-30°C on) to +120°C, short time up to +150°C The performance of ADDINOL Eco Gear W includes maximal oxidation stability, effective protection against wear and aging, extended intervals of oil changes with reduced friction between friction partners. This is how the efficiency of the gearboxes is increased, in almost all operational conditions in the drive, from low to maximum speeds.- maximum shear stability- lower power loss- ensures pumpability, even with extreme freezing-temperatures- increases the efficiency, decreases the temperatures- increased service life, prevents rust- neutral behavior towards all plastics- high performance for future challenges! Meets and exceeds requirements of specifications:- DIN 51527-3- ISO 12925-1- AGMA 9005-E02 Information: The viscosity to be utilized depends on the individual application, the operating conditions and the manufacturing specifications. Delivery conditions: Delivery outside of Germany is organized by ADDINOL distributors; the time of delivery can therefore depend on the location. Please ask about the conditions of delivery for you country of destination beforehand. ADDINOL Eco Gear 320 W, 20L Part manufacturer: Addinol Total units available: 15 Measurement unit: pcs Expected lead time: 2w Product group: Oil & Grease Wind turbine brand: All Condition: New
Wind turbine partsADDINOL Eco Gear 320 S is a silicon free high performance gear oil based on synthetic components (PAO) and especially developed additives (Surftec®-Technology) Perfectly suitable for the usage in wind turbines and for the lubrication in areas of boundary and mixed friction. Also suitable for lubrication of closed industrial areas of different types. Applicable to the lubrication of slide and rolling bearings. Preferred application with high and specific loads of the friction partners, with dynamically changing loads and thermic critical conditions in a broad temperature range. Applicable to the lubrication of gear couplings, conducts, joints and circular lubrication of all types and operating conditions. temperature range from-30°C to +120°C, short time up to +150°C- reliable prevention of micro pitting, pitting and equalization of damages on the surface- high scuffing load capacity even with low peripheral speeds and mixed friction- significant extension of the service life of machine elements and industrial plants- lower thermic stress of all gearbox components- larger intervals of oil changes due to less stress- significant increase of service life of the lubricants, especially with high operational temperatures- no limitation when used with roller or slide bearings, filters and centrifuges Meets and exceeds requirements of specifications:- DIN 51527-3- ISO 12925-1 Approval:- WINERGY for service fill- FLENDER- further approvals Information: The viscosity to be utilized depends on the individual application, the operating conditions and the manufacturing specifications. Delivery conditions: Delivery outside of Germany is organized by ADDINOL distributors; the time of delivery can therefore depend on the location. Please ask about the conditions of delivery for you country of destination beforehand. ADDINOL Eco Gear 320 S, drum (205L) Part manufacturer: Addinol Total units available: 5 Measurement unit: pcs Expected lead time: 2w Product group: Oil & Grease Wind turbine brand: All Condition: New
Wind turbine partsADDINOL Eco Gear 460 S is a silicon free high performance gear oil based on synthetic components (PAO) and especially developed additives (Surftec®-Technology) Perfectly suitable for the usage in wind turbines and for the lubrication in areas of boundary and mixed friction. Also suitable for lubrication of closed industrial areas of different types. Applicable to the lubrication of slide and rolling bearings. Preferred application with high and specific loads of the friction partners, with dynamically changing loads and thermic critical conditions in a broad temperature range. Applicable to the lubrication of gear couplings, conducts, joints and circular lubrication of all types and operating conditions. temperature range from-30°C to +120°C, short time up to +150°C- reliable prevention of micro pitting, pitting and equalization of damages on the surface- high scuffing load capacity even with low peripheral speeds and mixed friction- significant extension of the service life of machine elements and industrial plants- lower thermic stress of all gearbox components- larger intervals of oil changes due to less stress- significant increase of service life of the lubricants, especially with high operational temperatures- no limitation when used with roller or slide bearings, filters and centrifuges Meets and exceeds requirements of specifications:- DIN 51527-3- ISO 12925-1 Approval:- FLENDER- further approvals Information: The viscosity to be utilized depends on the individual application, the operating conditions and the manufacturing specifications. Delivery conditions: Delivery outside of Germany is organized by ADDINOL distributors; the time of delivery can therefore depend on the location. Please ask about the conditions of delivery for you country of destination beforehand. ADDINOL Eco Gear 460 S, drum (205L) Part manufacturer: Addinol Total units available: 5 Measurement unit: pcs Expected lead time: 2w Product group: Oil & Grease Wind turbine brand: All Condition: New
Wind turbine partsADDINOL Eco Gear 460 S is a silicon free high performance gear oil based on synthetic components (PAO) and especially developed additives (Surftec®-Technology) Perfectly suitable for the usage in wind turbines and for the lubrication in areas of boundary and mixed friction. Also suitable for lubrication of closed industrial areas of different types. Applicable to the lubrication of slide and rolling bearings. Preferred application with high and specific loads of the friction partners, with dynamically changing loads and thermic critical conditions in a broad temperature range. Applicable to the lubrication of gear couplings, conducts, joints and circular lubrication of all types and operating conditions. temperature range from-30°C to +120°C, short time up to 150°C- reliable prevention of micro pitting, pitting and equalization of damages on the surface- high scuffing load capacity even with low peripheral speeds and mixed friction- significant extension of the service life of machine elements and industrial plants- lower thermic stress of all gearbox components- larger intervals of oil changes due to less stress- significant increase of service life of the lubricants, especially with high operational temperatures- no limitation when used with roller or slide bearings, filters and centrifuges Meets and exceeds requirements of specifications:- DIN 51527-3- ISO 12925-1 Approval:- FLENDER- further approvals Information: The viscosity to be utilized depends on the individual application, the operating conditions and the manufacturing specifications. Delivery conditions: Delivery outside of Germany is organized by ADDINOL distributors; the time of delivery can therefore depend on the location. Please ask about the conditions of delivery for you country of destination beforehand. ADDINOL Eco Gear 460 S, 20L Part manufacturer: Addinol Total units available: 15 Measurement unit: pcs Expected lead time: 2w Product group: Oil & Grease Wind turbine brand: All Condition: New
Wind turbine partsADDINOL Eco Gear 220 S is a silicon free high performance gear oil based on synthetic components (PAO) and especially developed additives (Surftec®-Technology) Perfectly suitable for the usage in wind turbines and for the lubrication in areas of boundary and mixed friction. Also suitable for lubrication of closed industrial areas of different types. Applicable to the lubrication of slide and rolling bearings. Preferred application with high and specific loads of the friction partners, with dynamically changing loads and thermic critical conditions in a broad temperature range. Applicable to the lubrication of gear couplings, conducts, joints and circular lubrication of all types and operating conditions. temperature range from-30°C to +120°C, short time up to 150°C- reliable prevention of micro pitting, pitting and equalization of damages on the surface- high scuffing load capacity even with low peripheral speeds and mixed friction- significant extension of the service life of machine elements and industrial plants- lower thermic stress of all gearbox components- larger intervals of oil changes due to less stress- significant increase of service life of the lubricants, especially with high operational temperatures- no limitation when used with roller or slide bearings, filters and centrifuges Meets and exceeds requirements of specifications:- DIN 51527-3- ISO 12925-1 Approval:- FLENDER- further approvals Information: The viscosity to be utilized depends on the individual application, the operating conditions and the manufacturing specifications. Delivery conditions: Delivery outside of Germany is organized by ADDINOL distributors; the time of delivery can therefore depend on the location. Please ask about the conditions of delivery for you country of destination beforehand. ADDINOL Eco Gear 220 S, drum (205L) Part manufacturer: Addinol Total units available: 5 Measurement unit: pcs Expected lead time: 2w Product group: Oil & Grease Wind turbine brand: All Condition: New
Wind turbine partsADDINOL Eco Gear 220 S is a silicon free high performance gear oil based on synthetic components (PAO) and especially developed additives (Surftec®-Technology) Perfectly suitable for the usage in wind turbines and for the lubrication in areas of boundary and mixed friction. Also suitable for lubrication of closed industrial areas of different types. Applicable to the lubrication of slide and rolling bearings. Preferred application with high and specific loads of the friction partners, with dynamically changing loads and thermic critical conditions in a broad temperature range. Applicable to the lubrication of gear couplings, conducts, joints and circular lubrication of all types and operating conditions. temperature range from-30°C to +120°C, short time up to 150°C- reliable prevention of micro pitting, pitting and equalization of damages on the surface- high scuffing load capacity even with low peripheral speeds and mixed friction- significant extension of the service life of machine elements and industrial plants- lower thermic stress of all gearbox components- larger intervals of oil changes due to less stress- significant increase of service life of the lubricants, especially with high operational temperatures- no limitation when used with roller or slide bearings, filters and centrifuges Meets and exceeds requirements of specifications:- DIN 51527-3- ISO 12925-1 Approval:- FLENDER- further approvals Information: The viscosity to be utilized depends on the individual application, the operating conditions and the manufacturing specifications. Delivery conditions: Delivery outside of Germany is organized by ADDINOL distributors; the time of delivery can therefore depend on the location. Please ask about the conditions of delivery for you country of destination beforehand. ADDINOL Eco Gear 220 S, 20L Part manufacturer: Addinol Total units available: 15 Measurement unit: pcs Expected lead time: 2w Product group: Oil & Grease Wind turbine brand: All Condition: New
Wind turbine partsADDINOL Eco Gear 320 S is a silicon free high performance gear oil based on synthetic components (PAO) and especially developed additives (Surftec®-Technology) Perfectly suitable for the usage in wind turbines and for the lubrication in areas of boundary and mixed friction. Also suitable for lubrication of closed industrial areas of different types. Applicable to the lubrication of slide and rolling bearings. Preferred application with high and specific loads of the friction partners, with dynamically changing loads and thermic critical conditions in a broad temperature range. Applicable to the lubrication of gear couplings, conducts, joints and circular lubrication of all types and operating conditions. temperature range from-30°C to +120°C, short time up to 150°C- reliable prevention of micro pitting, pitting and equalization of damages on the surface- high scuffing load capacity even with low peripheral speeds and mixed friction- significant extension of the service life of machine elements and industrial plants- lower thermic stress of all gearbox components- larger intervals of oil changes due to less stress- significant increase of service life of the lubricants, especially with high operational temperatures- no limitation when used with roller or slide bearings, filters and centrifuges Meets and exceeds requirements of specifications:- DIN 51527-3- ISO 12925-1 Approval:- WINERGY for service fill- FLENDER- further approvals Information: The viscosity to be utilized depends on the individual application, the operating conditions and the manufacturing specifications. Delivery conditions: Delivery outside of Germany is organized by ADDINOL distributors; the time of delivery can therefore depend on the location. Please ask about the conditions of delivery for you country of destination beforehand. ADDINOL Eco Gear 320 S, 20L Part manufacturer: Addinol Total units available: 15 Measurement unit: pcs Expected lead time: 2w Product group: Oil & Grease Wind turbine brand: All Condition: New